Conveyor

  • Conveyor for Long Tubes (L1600/2100/2700 mm)
    Conveyor for Long Tubes (L1600/2100/2700 mm)
  • Conveyor for Transverse Tubing, with Alignment Function (L1700/2400 mm)
    Conveyor for Transverse Tubing, with Alignment Function (L1700/2400 mm)
  • Short Tube Conveyor and Collection Unit (W400/600/800 mm)
    Short Tube Conveyor and Collection Unit (W400/600/800 mm)

Conveyors handle tube collection at the end of single-screw extrusion lines and work directly with the haul-off and cutting unit. After each tube is cut to length, the conveyor moves it away from the cutting area and arranges the finished pieces for collection. We offer conveyor configurations suitable for long or short tubing, and each can be connected to the diameter measuring system and cutter so acceptable and defective products are collected separately.

Request a Quote
Technical Specifications
Item Long Tube Conveyor Transverse Tube Conveyor with Alignment Short Tube Conveyor and Collection Unit
Conveyor Length 1–5 m, customizable 1.7 or 2.4 m, customizable 0.4–0.8 m, customizable
Conveyor Speed 0.1–30 m/min, adjustable 0.1–30 m/min, adjustable 0.1–0.15 m/min, adjustable
Supply Voltage 220 V 220 V 220 V
Suitable Tube Diameter Ø6–Ø25 mm (long tubes) Ø6–Ø25 mm (tube arranging) Ø3–Ø15 mm (short tubes)
Motor Power 0.12–0.4 kW 0.12 kW 0.12–0.4 kW
Construction 304 stainless steel frame with PU belt 304 stainless steel frame with PU belt 304 stainless steel frame, PU belt, and stainless-steel collection hopper
Controls VFD speed control with manual and automatic modes VFD speed control with tube positioning VFD speed control with counting and collection functions
Additional Functions Can be connected to an extrusion line or winder Arranges tubes transversely Automatic counting and box loading
Features
  • Conveyors are available for both long and short tubes, and there is an appropriate configuration for each type of tube length. Choosing the correct conveyor configuration will reduce the need for manual handling and decrease production costs.
  • The conveyor length can be chosen according to the required tube cut length, so the finished tubes can be transferred and collected without crowding or falling out of position.
  • The conveyor arranges the finished tubes before collection, so operators can pick them up and handle them more easily.
  • The diameter measuring system is connected to both the cutter and conveyor. When a tube passes inspection, the air jet directs it into the built-in collection hopper. If a defect is detected, the measuring system immediately signals both cutting unit and conveyor to stop the air jet, and the conveyor carries the rejected tube to a separate bin.